Milwaukee
MXF HADO1000-802 · MX FUEL™ 10 kg demolition hammer
Vibration data and trigger-time calculator
Calculate this tool’s exposure
Other tools in your current tab’s daily draft are kept when you add this tool. Review the combined daily total in the calculator.
Time and points at your selected magnitude
Times assume no other exposure that day and are rounded down to whole minutes. These thresholds are not safe-time allowances. Keep exposure as low as reasonably practicable.
Manufacturer declarations
UK source · reviewed 12 September 2026 · Article 4933499357 · match kit, voltage and operation · Match your exact model, generation, attachment and working mode.
| Working mode | Declared m/s² | Uncertainty K m/s² |
|---|---|---|
| Chiselling | 5.8 | 1.5 |
| Drilling into concrete | Value required | Not available |
Declarations are test results, not workplace measurements. The starting estimate uses the higher of an assigned HSE tool-type value and declaration plus K where available. K is test uncertainty, not a workplace correction factor. This is Handarm’s starting rule, not an HSE model-specific recommendation or guaranteed upper bound. Use your employer’s assessed value where appropriate.
Current and historical sources are included; catalogue coverage and UK sales status are not fully verified. Missing or ambiguous figures require assessment.
HSE calculation and threshold guidance ↗